Skip navigation
Currently Being Moderated

Appendix c.3 Forwarding Syslog Messages from a Cisco CatOS Switch

VERSION 1 
Created on: Oct 11, 2011 4:59 PM by Zenoss API - Last Modified:  Oct 11, 2011 4:59 PM by Zenoss API

 3. Forwarding Syslog Messages from a Cisco CatOS Switch

  1. Log on to the target switch.

  2. Type the command enable at the prompt.

  3. Once you are prompted for a password, enter the correct password.

  4. Set the Syslog forwarding mechanism. See example below:

    set logging server <IP address of the server>
  5. You can set the types of logging information that you want the switch to provide with the commands below as examples:

    set logging level mgmt 7 default
    set logging level sys 7 default
    set logging level filesys 7 default
Comments (0)