Skip navigation
Currently Being Moderated

APC Automatic Transfer Switches (ATS)

VERSION 6  Click to view document history
Created on: Jun 30, 2011 11:56 AM by jcurry - Last Modified:  Dec 22, 2011 12:59 PM by jcurry

Developed by: Jane Curry                                           ZCA_Logo__Three_O_80x64.png


Description:

Provides support for APC Automatic Transfer Switch (ATS) devices with component and performance information for power inputs.

This ZenPack is Zenoss 3 compliant.

Screenshots:

ApcAtsInformation.jpg

APC ATS device showing device-level performance information for input and output frequencies.

 

ApcAtsInput.jpg

APC ATS device showing the Input component with performance graphs for voltage and current.

 

Components:

 

The ZenPack has the following new Device Class

  • /Devices/Power/ApcAtsDevice :

     

  • Components are:

     

    • ApcAtsInput  which has details for:
      • Input name, type, frequency, voltage and currently selected source
  • Modeler plugins are:

     

    • ApcAtsDeviceMap 
      • Gathers Hardware and Software manufacturer and product
      • Serial number
      • Status of both sources
    • ApcAtsInputMap 
      • Gathers the selected status source
      • For each input, gathers:
        • Input name, type, frequency and voltage
  • Device template AtsPowerOutput provides device-level performance information: 
    • Data Sources 
      • Input frequency for both sources
      • Output frequency
    • Thresholds 
      • No thresholds are provided
    • Graph Definitions 
      • Input frequency for both sources
      • Output frequency
  • Component template ApcAtsInput provides specific input performance information: 
    • Data Sources 
      • Input voltage
      • Output voltage and current
    • Thresholds 
      • No thresholds are provided
    • Graph Definitions 
      • Input voltage
      • Output voltage and current
  • A separate APC ATS Information menu delivers tabular and graphical information for the overall device

 

Installation:

zenhub and zopectl must be recycled after installing the ZenPack.

 


Requirements:

  • Zenoss Versions Supported: 3.0
  • External Dependencies: The APC ATS MIB needs to be available on target devices
  • ZenPack Dependencies:
  • Installation Notes: zopectl restart after installing this ZenPack.
  • Configuration:

History:

Change History:

  • 1.0 initial release
  • 1.1 extra dbugging
  • 1.2 updated for new github procedures

Tested: This ZenPack was tested with Zenoss 3.1 against APC AP7723 01devices

Source: https://github.com/jcurry/ZenPacks.ZenSystems.ApcAts

Latest egg file from github: https://github.com/jcurry/ZenPacks.ZenSystems.ApcAts/blob/master/dist/ZenPacks.ZenSystems.ApcAts-1.2-py2.6.egg?raw=true


Known issues:

Attachments:
Note: binary attachments ending in .zip will need to be unzipped before use.
Comments (0)