Skip navigation
Currently Being Moderated

Dell EqualLogic Monitor

VERSION 2  Click to view document history
Created on: Dec 19, 2010 9:47 PM by Nick Yeates - Last Modified:  Feb 7, 2011 1:52 PM by eric.enns

Submitted by: Eric Enns


Description:

This monitoring ZenPack provides Dell EqualLogic device details such as Volumes, HardDisk's, Fan's and Storage Pools. EqualLogic devices are often iSCSI-based SAN appliances for easy storage management in data centers.

Screenshots:

Screen shot 2010-10-15 at 5.19.21 PM.png

Screen shot 2010-10-15 at 5.20.20 PM.png

Screen shot 2010-10-15 at 5.20.36 PM.png

Screen shot 2010-10-15 at 5.20.49 PM.png

Screen shot 2010-10-15 at 5.21.09 PM.png

 

Components:

The ZenPack has the following Device Class(es)

  • EqualLogic/zport/dmd/Devices/Network/SAN/EqualLogic

    • Performance Template DellEqualLogicFan

      /zport/dmd/Devices/Network/SAN/EqualLogic/rrdTemplates/DellEqualLogicFan

      DataSource Datapoint Description
      highFanSpeed


      highFanSpeed
      lowFanSpeed


      lowFanSpeed
      rpm


      rpm
      status


      status

      Graph Fan Speed

       

      Name Type Description
      High Fan SpeedThresholdGraphPoint
      Low Fan SpeedThresholdGraphPoint
      rpmDataPointGraphPoint
    • Performance Template DellEqualLogicHardDisk

      /zport/dmd/Devices/Network/SAN/EqualLogic/rrdTemplates/DellEqualLogicHardDisk

      DataSource Datapoint Description
      status


      status

 

Installation:

Install the dependencies then do a zopectl restart, then install the zenpack. Once installed, add the Dell EqualLogic device to be monitored by doing the following in a terminal as the zenoss user: "zendisc run --deviceclass=/Network/SAN/EqualLogic and --device=ipaddress". You can also add the device traditionally via the GUI like all other device, as long as you set the deviceclass. Once it is discovered just model the device and you are now ready to get some info.

 

Dependencies:

ZenPacks.community.deviceAdvDetail >=1.6

 


Installation Requirements:

  • Zenoss Versions Supported: 3.0.2
  • External Dependencies: None
  • ZenPack Dependencies:
    • ZenPacks.community.deviceAdvDetail >=1.6
  • Configuration:

History:

Change History:

  • 1.0 initial release
  • 1.1 fix for bug found by IRC user

Tested: This ZenPack was tested with Zenoss  version 3.0.2.

Source:


Known issues:

Only works with one StoragePool as that is all I have to test with. When  my company gets another EqualLogic will test a secondary StoragePool.

Attachments:
Note: binary attachments ending in .zip will need to be unzipped before use.
Comments (4)